New Tamaduino Page, Side Gigs

As you can see at the top of the blog, I added a Tamaduino page. The page is an attempt to provide more context for the project and details about the different resources that form the foundation of this project.

In other news, I'm still waiting for the new circuits from browndoggadets.com.

In the mean time I'm keeping my self busy with some side projects:

• building a magnetic stirrer for my friends yeast-cultivation  
• constructing a digital neuron from an old 10x1bit DRAM chip

I'll add some pictures as soon as I get to it!

A Brain in a Brain

The circuit discussed in my last two posts already has some intelligence of its own. The TP4057 charge control IC switches between constant current and voltage mode as the lithium cell increases in charge, and the DW01AM over- and discharge protection IC disconnects the battery's negative terminal from the rest of the circuit in the event that its voltage drops below 2V, or if the charge voltage rises over 4.3V.

As part of the Energy Brain I want the ATtiny uC to monitor the Li-Ion cell and the super-capacitor voltage. When either drops below a certain level, the ATtiny communicates on an interrupt line with the uC in the Memory & Learning Brain and lets it know what's up. The Memory & Learning Brain can then decide what to do with that information; to initiate a recharge of the super-capacitor, to communicate a request for solar charge to the outside world, to alter sensing and communication behavior in ways that conserve energy, or to send other Brains into sleep mode.

What I'm trying to mimic here is the connection between the biological gut and brain; the involuntary sensation of hunger or exhaustion, and the intentional decision to eat, sleep, or forage for food.

HP-0014B PRO Charge Controller Circuit Diagram

I spent some time mapping the Li-Ion charging circuit I purchased. As far as I can tell the circuit is a combination of the reference design for each of the integrated circuits - U2, U3, and U4 - and an RC filter. My guess is that the RC filter is supposed to keep the noise from the DC/DC converter from interfering with the current monitoring of the lithium cell charging IC.

The next step is to evaluate the best way to interface an ATtiny85 to monitor and control the circuit.

Datasheets:

U1: GTT8205S N-Channel MOSFETs

U2: DW01AM Lithium Cell Over- and Discharge Protection IC

U3: CE8301 Step-Up DC/DC Converter IC

U4: TP4057 Lithium Cell Charge Controller IC

Hardware for the Energy Brain

Most of these components were left over from other projects:

• 5V/100mA Solar Panel
• Plastic Project Box
• 1F Super-Capacitor
• Atmel ATtiny85 Microcontroller
• 3.7V 1120mAh Li-Ion Camera Battery

My experience building charge controllers and switching power supplies is limited. To save time I ordered this little circuit from browndoggadgets.com:

This 3.7V Li-Ion charge control circuit accepts 5V Vin and has an integrated 5V boost supply that feeds off the battery. My hope is to modify the circuit board so that the ATtiny85 uC can turn the 5V boost supply on and off as needed.

Tamaduino: Energy and Stamina

This might seem a little unconventional, but rather than having the Tamaduino's hardware hooked up to a steady power supply, I want to introduce the concept of stamina. I'm thinking of achieving that by using a 1F super-capacitor as primary power source. The capacitor will deplete much more quickly than a battery, but slow enough to allow the Tamaduino to do stuff. 

Depending on the amount of charge stored in the capacitor, the Tamaduino's interactive abilities would change. When the charge drops below a certain level, the Tamaduino will have to rest while the Energy Brain activates a boost circuit and recharges the super-capacitor from a Li-Ion battery. If the charge in the Li-Ion battery drops below a certain level, the Tamaduino will start making an effort to motivate forces in the environment to move the Tamaduino to a location where its solar panel can recharge the Li-Ion battery. Simultaneously it would start changing its overall behavior to conserve as much energy as possible until it has eaten a sufficient amount of photons.

In some way I'm trying to mimic a biological energy metabolism. Humans ingest food and store the energy in different mediums. Some of them are accessible super quickly, like ATP, some of them require metabolizing, but are fast acting, like sugar, and some mediums, like fat, are very energy dense but take much more time and effort to be converted into biologically available energy. 

In the Tamaduino's energy metabolism, sunlight would be the food; the Li-Ion battery would be the fat; the super-capacitor would be the glucose; and the distributed electrolyte- and ceramic capacitors would be like ATP. The comparison might be a little off, but I hope my biology metaphors make sense.

Provisional Block Diagram

In my block diagram I'm using the metaphor of different "brains" to identify different subsystems of the Tamaduino. The human brain has parts that are older and more basic, like the brain stem and the cerebellum, and parts that are more recent and complex, such as the frontal lobes. 

Looking at my diagram here, I'd have to say that the "Energy Brain" is the place to start this project. The biological analog of the Energy Brain would be the brain stem. It is responsible for the basic metabolic processes of the host. I'll be publishing a rough draft of the Tamaduino's energy system sometime soon. It's gonna be weird.

Outline of the Tamaduino Project

As the portmanteau suggests, I'm setting out to create a Tamagotchi inspired, Arduino powered device. I'm going to lay out what I have in mind so far to help me conclude the next steps more clearly.

Features:

• senses sound, light, temperature, vibration/movement, being handled
• responds to environment with light, sound, vibration, other actuators
• rechargeable battery and a solar panel
• AI like software that interacts with its environment to optimize care-taking 

Design Goals:

• create a device with a survival instinct
• abstract bio-mimicry throughout the device
• bottom-up design approach
• AI being shaped by and engaging in operand conditioning

Frankly, I have no idea what I'm doing and I'm in way over my head. But since I don't care, here's my preliminary TODO list to help guide me through the next few steps:

1. Create provisional block diagram
2. Draft a preliminary design for the most fundamental block
3. Source the necessary hardware
4. Build, test, improve the block
5. Modify provisional block diagram
6. Draft preliminary design for the next most fundamental block
7. Repeat steps 3 to 6 until project complete

¯\_(ツ)_/¯